5.
nous motors.
FM7...
. Note that the highlighted drives appearing in the tables will
be available soon.
Asynchronous
spindle motor
Power (kW)
(%) Drive power
Drive for
asynchronous
spindle motor
Drive
Pm
S1 S6-40% S1 S6-40% (kW)
(%)
(kW)
FM7-A037 3.7 5.5 83.5 83.5 6.6 QC-DR-030 90 7.4
FM7-A055 5.5 7.7 86.0 84.5 9.1 QC-DR-030 90 10.1
FM7-A075 7.5 11.0 86.5 84.6 13.0 QC-DR-030 90 14.4
FM7-A090 9.0 13.0 87.3 85.7 15.2 QC-DR-040 90 16.9
FM7-A110 11.0 15.5 90.2 89.2 17.4 QC-DR-040 90 19.3
FM7-A150 15.0 22.0 90.4 89.3 24.6 QC-DR-055 90 27.4
FM7-B120 12.0 18.5 91.0 90.4 20.5 QC-DR-055 90 22.7
FM7-A185 18.5 26.0 91.8 91.5 28.4 QC-DR-080 90 31.6
FM7-A220 22.0 33.0 89.2 88.1 37.5 QC-DR-120 90 41.6
FM7-B170 17.0 25.0 89.1 87.7 28.5 QC-DR-080 90 31.7
FM7-A300 30.0 45.0 92.1 91.6 49.1 QC-DR-120 90 54.6
FM7-A370 37.0 56.0 92.5 91.7 61.1
QC-DR-160 90 67.9
FM7-B220 22.0 33.0 91.3 90.5 36.5 QC-DR-120 90 40.5
FM7-B280 28.0 42.0 91.1 90.0 46.7 QC-DR-120 90 51.9
FM7-A510 51.0 71.0 92.8 92.2 77.0
QC-DR-160 90 85.6
FM7-C215 21.5 29.0 85.4 82.7 35.1 QC-DR-120 90 39.0
FM7-C270 27.0 37.0 86.6 83.9 44.1
QC-DR-160 90 49.0
FM7 ASYNCHRONOUS SPINDLE MOTORS E01 | E02
Maximum power consumed by the main power supply (kW)
ASYNCHRONOUS
Asynchronous for spindle Pm
1
2
POWER SUM (kW)
2
Pm:
Required power drawn for the asynchronous spindle drive in S6-40% cycles.
This data includes the internal losses of the drive. fc: 4 kHz.
where:
Pm
. Maximum power that the drive may demand from the main power supply for each motor-drive
combination. It includes the power dissipated by the drive itself. Units: kW.
To Next Page
Loading...