Fagor QC-PDS - 8.6.8 SERCOS-III connections for the integrated QUERCUS CNC

 Installation
8.
INSTALLATION
Connection of the control and communications signals
302
Ref.2003
· 296 ·
QC-PDS
HARDWARE
8.6.8 SERCOS-III connections for the integrated QUERCUS CNC
The SERCOS-III connection between the QC-DR-X-FX drive (B10B/B10A
connectors) or the QC-RPS-X-FX power supply (B10B/B10A connectors)
to the integrated FAGOR CNC 8065 central unit is made via the B10
connector found on the back of the QUERCUS CNC. See figure.
For more information, refer to the manuals of the FAGOR QUERCUS
CNC.
F. H8/46
B10 connector. SERCOS-III connector for the integrated FAGOR Q UER C US
CNC .
B10
10K integrated
Q
UER C US CNC