Fagor QC-PDS - Page 164

 Auxiliary modules
4.
AUXILIARY MODULES
External Auxiliary Power Supplies
174
Ref.2003
· 164 ·
QC-PDS
HARDWARE
QC-APS3-15 + QC-RPS-  -F 
The connection is made using two 2.5 mm² conductors to connect,
respectively, the +24V/GND terminals of the QC-APS3-15 auxiliary power
supply with the under cover +24V/GND terminals of the adjacent QC-RPS-
 -F  power supply. See the figure.
F. H4/18
A18 connector. +24 V DC output of the QC-APS3-15 auxiliary power supply.
A18
QC-APS3-15
QC-RPS-030-FF2 QC-DR-40-FS2
QC-DR-30+30-FD2
QC-BPM-100