Fagor QC-PDS - Page 219

 Cables
CABLES
Power cables. DRIVE|MOTOR connection
7.
· 219 ·
Ref.2003
QC-PDS
HARDWARE
Therefore, before making the connection, mount the corresponding
X11A/X11B or A19/X11 aerial power connector of the corresponding drive
(depending on the drive model) on one of the cable ends and the
corresponding motor power connector on the other end.
For more information, see X11A/X11B or A19/X11 drive connectors (as
appropriate) in chapter 3. DRIVES.
Information regarding the connector to be mounted by the user on the
motor side end is provided in the corresponding motor manual.
Characteristics
Reference MPC-4x S -  M
 e approx. See table T. H7/4
Type Shielded. It ensures EMC compatibility.
Flexibility
High. Specifically for cable-carrying chains with a
minimum bending radius for dynamic 7.5x
 e
conditions (up to 16 mm²) and 10x
 e (from 25 mm²)
and static conditions 4x
 e.
Covering
PUR. Polyurethane resistant to chemicals used in
machines/tools.
Permissible temperature
range
Work: -40°C/+80°C (-40°F/+176°F)
Storage: -50°C/+90°C (-58°F/+194°F)
Rated
voltage
VDE Uo/U: 600/1000 V
UL/CSA 1000 V
Reference MPC-4x
S +(2x  )-  M
 e approx. See table T. H7/4
Type Shielded. It ensures EMC compatibility.
Flexibility
High. Specifically for cable-carrying chains with a
minimum bending radius for dynamic 10x
 e and
static 7.5x
 e conditions.
Covering
PUR. Polyurethane resistant to chemicals used in
machines/tools.
Permissible temperature
range
Work: -30°C/+80°C (-22°F/+176°F)
Storage: -30°C/+80°C (-22°F/+176°F)
Rated
voltage
VDE Uo/U: 600/1000 V
UL/CSA 600 V
multi-pole cable for a
brakeless motor
multi-pole cable for a
motor with a brake