Fagor QC-PDS - Page 74

 Power supplies
80
2.
POWER SUPPLIES
Regenerative Power Supplies
· 74 ·
Ref.2003
· 74 ·
QC-PDS
HARDWARE
X5 connector.
RS-232 serial line
9-pin female sub-D connector to connect a compatible PC or laptop via a
RS-232 serial line cable in order to install/update a software version for
the regenerative power supply, set the configuration parameters and to
adjust them.
Pinout
Pin description
Installation
See section, 8.6.9 RS-232 SERIAL LINE CONNECTION.
NOTE. Only available at the QC-RPS-160-SN0 model.
F. H2/26
X5 connector. Pinout.
T. H2/18 X5 connector. Pin description.
Pin Signal Description
1
N. C.
Not connected
2
RxD
Receive data
3
TxD
Data transmission
4
+ 5 V DC
Supply voltage
5
0 V DC
Reference of power supply
6
N. C.
Not connected
7
*
Reserved
8
N. C.
Not connected
9
*
Reserved
CH
CHASSIS
Cable shield
* Reserved pins must not be connected.
1
2
3
4
5
6
7
8
9
Front view of the X5 connector
of the equipment