FLIR T Series - Adding a Voice Annotation

20.2 Adding a voice annotation
General
A voice annotation is an audio recording that is saved in an infrared image.
The voice annotation is recorded using a microphone headset connected to the
camera. The headset can be connected using a cable, or using Bluetooth
®
wireless
technology. The recording can be played back in the camera, and in image analysis
and reporting software from FLIR Systems.
Procedure
Follow this procedure to add a voice annotation:
To preview an image, push the Preview/Save button. This will display the
documentation toolbar.
1
On the documentation toolbar, select the voice annotation toolbar
button, using the joystick.
2
Push the joystick. This will display the voice annotation toolbar.3
Record the voice annotation. Make sure the microphone headset is con-
nected to the camera.
For information about the toolbar buttons on the voice annotation toolbar,
see section 10.2.4 – Voice annotation toolbar on page 33.
4
To save the voice annotation and close the voice annotation toolbar, select
OK and push the joystick.
5
On the documentation toolbar, select Save and push the joystick.6
100 Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010
20 – Annotating images