13 Pairing Bluetooth
®
devices
General
Before you can use a Bluetooth
®
device with the camera, you need to pair the devices.
Procedure
Follow this procedure:
Insert a Bluetooth
®
USB micro adapter into the USB connector.1
Turn on the camera.2
Push the Setup button.3
Go to the Connect tab.4
To select Add device, move the joystick up/down.5
Push the joystick.
At this stage you need to refer to the user documentation for your Bluetooth
®
device.
During the pairing sequence you may need to refresh the dialog box by
clicking Refresh.
6
Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010 41
To Next Page
Loading...
Need help?
General
