16.5 Opening an image
General
When you save an image, it is stored on the SD Memory Card. To display the image
again, you can recall it from the SD Memory Card.
Procedure
Follow this procedure to open an image:
Push the Archive button to open the most recently saved image.1
If you want to open another image, do one of the following:
■
1 Move the joystick upwards. This will display the images as thumbnails.
2 Select the image you want to open by using the joystick.
3 Push the Select button to open this image.
■
Move the joystick left/right. This will display the next/previous image in
the full image mode.
2
NOTE
To leave archive mode, push the Archive button.
66 Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010
16 – Working with images and folders
To Next Page
Loading...
Need help?
General
