FLIR T Series User Manual

15 Handling the camera
15.1 Charging the battery
NOTE
You must charge the battery for four hours before you start using the camera for the
first time.
General
You must charge the battery when a low battery voltage warning is displayed on the
screen.
Follow one of these procedures to charge the battery:
■
Use the combined power supply and battery charger to charge the battery when
it is inside the camera.
■
Use the combined power supply and battery charger to charge the battery when
it is outside the camera.
■
Use the stand-alone battery charger to charge the battery
SEE
For information on how to charge the battery, see the following sections:
■
Section 15.1.1 – Using the combined power supply and battery charger to charge
the battery when it is inside the camera on page 46
■
Section 15.1.2 – Using the combined power supply and battery charger to charge
the battery when it is outside the camera on page 47
■
Section 15.1.3 – Using the stand-alone battery charger to charge the battery on
page 48
Publ. No. 1558792 Rev. a460 – ENGLISH (EN) – July 1, 2010 45

FLIR T Series Specifications

General

Brand	FLIR
Model	T Series
Category	Thermal cameras
Language	English