Fortinet FortiGate Series

Configuring a protection profile Firewall Protection Profile
FortiGate Version 4.0 MR1 Administration Guide
488 01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
To configure protocol recognition options, go to Firewall > Protection Profile. Select Create
New to add a protection profile, or the Edit icon beside an existing protection profile. Then
select the Expand Arrow beside Protocol Recognition, enter the information as described
below, and select OK.
Figure 277: Protection profile Protocol Recognition options (SSL content scanning and
inspection)
Figure 278: Protection profile Protocol Recognition options
Add or
Edit Monitored
Remove
Port
Numbers
Ports
Add or
Edit Monitored
Remove
Port
Numbers
Ports
Note: If your FortiGate unit supports SSL content scanning and inspection, you must set
HTTPS Content Filtering Mode to Deep Scan before you can configure additional HTTPS
content scanning protection profile options.