Fortinet FortiGate Series Administration Guide

What’s new in FortiOS Version 4.0 MR1 IPv6 administrative access
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903 65
http://docs.fortinet.com/ • Feedback
Administrator settings
You can configure trusted host settings for administrators who connect over an IPv6
network. The Administrator settings (go to System > Admin > Administrators) provides
new fields for the IPv6 trusted host IP addresses.
Figure 4: IPv6 trusted host settings
The equivalent settings in the CLI are as follows:
Syntax
config system admin
edit "admin"
set ip6-trusthost1 2002::2/64
set ip6-trusthost2 ::/0
set ip6-trusthost3 ::/0
end
Example
config system admin
edit "admin"
set ip6-trusthost1 2002::2/64
set ip6-trusthost2 ::/0
set ip6-trusthost3 ::/0
end
Variable Description Default
ip6-trusthost1 <ip6addr>
ip6-trusthost2 <ip6addr>
ip6-trusthost3 <ip6addr>
Enter up to three trusted IPv6 address from
which administrative access is permitted.
No default.

Fortinet FortiGate Series Specifications

General

Model	FortiGate Series
Category	Firewall
Throughput	Varies by model
Interfaces	Varies by model
Concurrent Sessions	Varies by model
VPN Support	Yes
High Availability	Yes
Firewall Throughput	Varies by model
VPN Throughput	Varies by model
IPS Throughput	Varies by model
NGFW Throughput	Varies by model
Threat Protection Throughput	Varies by model
New Sessions per Second	Varies by model
Power Supply	Varies by model
Security Features	Firewall, IPS, Application Control, Web Filtering, Antivirus, VPN
Virtual Domains	Yes
Form Factor	Desktop, Rackmount