Fortinet FortiGate Series Administration Guide

Log&Report Viewing DLP Archives
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903 725
http://docs.fortinet.com/ • Feedback
Filtering log messages
You can filter log messages by selecting the Filter icon to display specific information
about log messages. The filter settings that are applied remain until you log out of the
web-based manager. Log filters automatically reset to default settings when you log into
the web-based manager.
Figure 449: Log filters
To filter log messages
1 Go to Log&Report > Log Access.
2 Select the tab to view logs from, Memory, Remote or Disk.
3 Select a log type from the Log Type list.
4 Select the Filter icon in the column to view logs.
5 Select Enable to enable filtering for the column.
6 Enter the information as appropriate. Fields vary between type.
For more information about using the filter icons to filter log messages, see “Adding
filters to web-based manager lists” on page 99
.
7 Select OK.
8 Select the columns to filter in the Filter list.
You can also select the columns that appear in the Filter list instead of selecting the
actual column.
You can view log messages in Raw format only after configuring the filters. If you want to
delete all filter settings, select the Clear All Filters that is located under the Filters list.
Viewing DLP Archives
Go to Log & Report > DLP Archive to view all DLP archived content stored on a
FortiAnalyzer unit or the FortiGuard Analysis and Management server.
The DLP Archive menu is only visible if:
• You have configured the FortiGate unit for remote logging and archiving to a
FortiAnalyzer unit. See “Remote logging to a FortiAnalyzer unit” on page 710.
Note: The Detailed Information column provides the entire raw log entry and is needed only
if the log contains information not available in any of the other columns. The VDOM column
displays which VDOM the log was recorded in.
You can view the device ID and device name when customizing columns. The device ID
provides the identification name of the device. The device name is the host name that you
configured for the FortiGate unit, for example Headquarters.
Filter icon
(enabled)
Filter icon
(disabled)

Fortinet FortiGate Series Specifications

General

Model	FortiGate Series
Category	Firewall
Throughput	Varies by model
Interfaces	Varies by model
Concurrent Sessions	Varies by model
VPN Support	Yes
High Availability	Yes
Firewall Throughput	Varies by model
VPN Throughput	Varies by model
IPS Throughput	Varies by model
NGFW Throughput	Varies by model
Threat Protection Throughput	Varies by model
New Sessions per Second	Varies by model
Power Supply	Varies by model
Security Features	Firewall, IPS, Application Control, Web Filtering, Antivirus, VPN
Virtual Domains	Yes
Form Factor	Desktop, Rackmount