Fortinet FortiGate Series Administration Guide

What’s new in FortiOS Version 4.0 MR1 IPv6 DNS
FortiGate Version 4.0 MR1 Administration Guide
01-410-89802-20090903 63
http://docs.fortinet.com/ • Feedback
IPv6 DNS
In FortiOS Version 4.0 MR1, you can configure DNS server addresses for IPv6 traffic. This
is available only in the CLI. There are new keywords for the config system dns
command, as follows:
Syntax
config system dns
set ip6-primary <ipv6_addr>
set ip6-secondary <ipv6_addr>
end
These new keywords also apply to the new config system vdom-dns command. See
“Per-VDOM DNS configuration” on page 74.
Example
config system dns
set ip6-primary 2002::1
set ip6-secondary 2002::2
end
IPv6 transparent mode
FortiOS 4.0 MR1 supports IPv6 traffic in Transparent mode.
IPv6 administrative access
You can configure remote administration over an IPv6 network. This is possible because
of changes to network interface and administrator configurations. To see IPv6 options in
the we-based manager, you must enable IPv6 Support on GUI in System > Admin >
Settings.
Variable Description Default
ip6-primary
<ipv6_addr>
Enter the IP address of the primary DNS server for
IPv6 traffic.
No default.
ip6-secondary
<ipv6_addr>
Enter the IP address of the secondary DNS server
for IPv6 traffic.
No default.

Fortinet FortiGate Series Specifications

General

Model	FortiGate Series
Category	Firewall
Throughput	Varies by model
Interfaces	Varies by model
Concurrent Sessions	Varies by model
VPN Support	Yes
High Availability	Yes
Firewall Throughput	Varies by model
VPN Throughput	Varies by model
IPS Throughput	Varies by model
NGFW Throughput	Varies by model
Threat Protection Throughput	Varies by model
New Sessions per Second	Varies by model
Power Supply	Varies by model
Security Features	Firewall, IPS, Application Control, Web Filtering, Antivirus, VPN
Virtual Domains	Yes
Form Factor	Desktop, Rackmount