Write card
Used for saving the data from the Flair on a data card. Read in data can not be saved on
<<Customer parameter card>>.
User Terminal Screen Terminal
Carry out read card procedure TERMINAL READY
DATA LOADED
write card key Check whether data bit has been set
into the terminal.
OVERWRITE
CARD ?
Press ESC or Enter
ESC = Cancel
Writing terminal data into the card PLEASE WAIT
TERMINALèCARD
TERMINAL READY
DATA LOADED
Possible mistakes:
Wrong card ERROR
CARD TYP WRONG
No communication ERROR
WRITE ERROR
Data type from E2 wrong
ERROR
CARD TYPE WRONG
Press Enter or ESC Text as before error TERMINAL READY
DATA LOADED
Print data
Press the <<Print data>> take to the menu for the printout.
The printing process can be started by <<Enter>>. Please check first has been switched on
the printer (ê if lights up green).
User Terminal Screen Terminal
Carry out read coffee procedure TERMINAL READY
DATA LOADED
Print data key
Check whether data bit has been set.
Output of the data is stored in the
Terminal.
TOTAL PRINT OUT
COUNTER PRINTOUT
PROGRAM PRINTOUT
CUSTOM PRINTOUT
The desired printout type can be
selected with the cursor keys *.
Enter = Start, ESC = Exit
PLEASE WAIT
PRINT DATA
TERMINAL READY
DATA LOADED
Possible mistakes:
No communication.
Can not print.
ERROR
PRINT ERROR
No printer data on Terminal ERROR
DATA TYP WRONG
Press Enter or ESC Text as before error TERMINAL READY
DATA LOADED
Notice: The current language is view with a number on the printout.
Country code for language:
0
German
4
English
1
Italian
5
French
2
Dutch
6
Portuguese
3
Spanish
To Next Page
Loading...
Need help?
General
