What to do if ...?
220
Practical hints
All warning/indicator lamps (except the
turn signal indicator lamps) and the display
are activated when the ignition is switched
on. Please check that they are working
properly before commencing a journey.
Vehicles without steering wheel but-
tons
Warnings, malfunctions or additional infor-
mation may also be shown in the display.
The following table shows messages which
could appear in the display.
Certain messages are accompanied by a
warning signal or a permanent tone.
Please respond in accordance with the
messages and follow the additional notes
in this Operator's Manual.
Vehicles with steering wheel buttons
The operating system shows warnings,
malfunctions or additional information in
the display.
Certain messages are accompanied by a
warning signal or a permanent tone.
High-priority messages are highlighted in
red in the display.
Please respond in accordance with the
messages and follow the additional notes
in this Operator's Manual.
Low-priority messages can be acknowl-
edged using the V, U, &
or * buttons on the steering wheel or
using the 9 reset button on the in-
strument cluster.
Highest-priority messages cannot be ac-
knowledged. These messages will contin-
ue to be shown in the display until their
cause has been eliminated.
The on-board computer saves certain dis-
play messages in the message memory
(
e page 89).
The following table shows messages which
could appear in the display. The messages
are divided into two types and are sorted
alphabetically.
to make it easier for you to find the rele-
vant message:
O text messages (e page 223)
O symbol messages (e page 226)
Notes on display messages
G Warning
No messages can be displayed if there is a
failure of the instrument cluster and/or the
display.
You will not then be able to see information
about the vehicle status, such as speed and
outside temperature, warning and indicator
lamps, malfunction and warning messages or
the failure of systems. Handling characteris-
tics may be affected. You should therefore
adapt your driving style and the vehicle speed
accordingly.
Contact an authorized Sprinter Dealer imme-
diately. In particular, work relevant to safety
or on safety-related systems must be carried
out at an authorized Sprinter Dealer.
G Warning
The operating safety of your vehicle could be
affected if maintenance work is carried out
incorrectly. As a result, you could lose control
of your vehicle and cause an accident. Also,
the safety systems may no longer be able to
protect you or others as they are designed to
do.
Always have maintenance work carried out at
an authorized Sprinter Dealer. In particular,
work relevant to safety or on safety-related
systems must be carried out at an authorized
Sprinter Dealer. There is a risk of an accident
and injury if this work is carried out incorrect-
ly.