freightliner Sprinter Operator's Manual

Seats
72
Controls in detail
The folding seat is on the co-driver's side.
Folding seat (example with partition sliding
door)
E Remove key 1 from partition sliding
door.
E Fold seat cushion 2 down or up.
The seat cushion is held in the relevant
position.
i Do not exceed the maximum permissible
number of seats for passenger vans.
! For safety reasons, the rear bench seat with
4 seats must be removed or installed by an au-
thorized Sprinter Dealer.
Removing the rear bench seat with 2 or
3 seats
Folding seat
G Warning
When folding down the seat cushion, make
sure that nobody can become trapped.
There is a risk of injury to the co-driver in the
event of sudden steering movements or an
accident if there is a key inserted in the parti-
tion sliding door lock.
Remove the key from the partition sliding
door before using the folding seat.
Rear bench seat
G Warning
All release levers on the legs of the rear
bench seat must be parallel to the vehicle
floor. A rear bench seat with 2 seats may only
be installed on the left side of the vehicle.
The integrated seat belt can only offer the de-
gree of protection for which it is designed if
you install the specified rear bench seats cor-
rectly. Therefore, you must have the rear
bench seat with 4 seats installed by an autho-
rized Sprinter Dealer.
Keep the seat bench mounting cups in the ve-
hicle floor free from dirt and foreign objects.
This is the only way to guarantee that the
locking mechanisms will engage securely.
For reasons of safety, only have seat mount-
ing cups retrofitted at an authorized Sprinter
Dealer.

freightliner Sprinter Specifications

General

Brand	freightliner
Model	Sprinter
Category	Automobile
Language	English