freightliner Sprinter Operator's Manual

Operating system with steering wheel buttons
96
Controls in detail
E Press the & or * button repeat-
edly until you see the
Headlamps mes-
sage in the display.
The current setting is highlighted.
E Press the W or X button to se-
lect whether and for how long the lights
should remain on.
Vehicle submenu
Setting station selection
The Search function enables you to deter-
mine whether the radio should search for a
new station or a previously stored station
each time the radio is operated using the
steering wheel buttons (not with
Audio 20).
The
Frequency setting starts the station
search. The
Memory setting selects the next
stored station.
Use the buttons on the steering wheel.
E Press the V or U button repeat-
edly until you see the Settings menu in
the display.
E Press & to switch to the submenu
selection.
E Press the W or X to select the
Vehicle submenu.
E Press the & or * button repeat-
edly until you see the
Search message
in the display.
The current setting is highlighted.
E Press the W or X button to se-
lect how the radio should tune into a
station.
Setting the windshield wiper sensitivity
You can use the
Wipe sensor function to
set the sensitivity of the rain sensor:
O
Level 1 : High sensitivity
Wiping begins in light rain
O
Level 2 : Moderate sensitivity
O Level 3 : Low sensitivity
Wiping only begins in heavy rain
Use the buttons on the steering wheel.
E Press the V or U button repeat-
edly until you see the Settings menu in
the display.
E Press & to switch to the submenu
selection.
E Press the W or X to select the
Vehicle submenu.
E Press the & or * button repeat-
edly until you see the
Wipe sensor mes-
sage in the display.
The current setting is highlighted.
E Press the W or X button to
select the level of sensitivity of the rain
sensor.

freightliner Sprinter Specifications

General

Brand	freightliner
Model	Sprinter
Category	Automobile
Language	English