Operating system with steering wheel buttons
88
Controls in detail
With Sound 5/Audio 20, the operating
system always shows the AUDIO and TEL
(telephone) menus in English. This is the
case even if a different language is select-
ed for the display.
In the Operation menu, you can select the
following functions using the & or *
button:
O Trip meter and odometer (standard dis-
play)
O Display coolant temperature
(
e page 88)
O Calling up the service due date
(e page 194)
O Tire pressure monitor (e page 175)
O Checking the engine oil level
(
e page 160)
Standard display
In its basic setting, you will see the odom-
eter and the trip meter in the upper part of
the display. This is referred to as the stan-
dard display.
Use the buttons on the steering wheel.
E If you see a different display, press the
V or U button repeatedly until
the standard display appears.
1 Odometer
2 Trip meter
3 Outside temperature or digital
speedometer
4 Time
5 Selector lever position or current shift
range
Displaying the coolant temperature
Use the buttons on the steering wheel.
E Press the V or U button repeat-
edly until the standard display appears.
E Press the & or * button repeat-
edly until you see the
Coolant temper-
ature
in the display.
The temperature displayed may climb to
250 °F (120 °C) when the vehicle is being
driven in normal conditions and if the cool-
ant contains the correct concentration of
corrosion inhibitor and antifreeze. It is ac-
ceptable for the coolant temperature to
rise to the end of the scale at high outside
temperatures and when driving in moun-
tainous terrain.
You can use the functions in the Audio
menu to control the audio equipment that
you have just switched on.
Operation of the audio equipment using
the steering wheel buttons and making
settings using the AUDIO menu only func-
tion as described if our approved audio
equipment is installed. If you are using au-
dio equipment from another manufacturer,
the described functions may be restricted
or may not be available at all.
If you have a Sound 5 or Audio 20 installed
and no audio equipment is switched on,
you will see the
AUDIO off
message.
Operation menu
Audio menu