Operating system with steering wheel buttons
94
Controls in detail
E Press & to switch to the submenu
selection.
E Select the Clock/Date submenu using
the W or X
button.
E Press the & or * button repeat-
edly until you see the
12/24 h
message
in the display.
The current setting is highlighted.
E Use the W or X button to select
the
12 h
or
24 h
clock format.
Setting the date
Use the buttons on the steering wheel.
E Press the V or U button repeat-
edly until you see the Settings menu in
the display.
E Press & to switch to the submenu
selection.
E Select the Clock/Date submenu using
the W or X
button.
E Press the & or * button repeat-
edly until you see the
Date Day
or
Month
or
Year
message in the display.
E Set the day, month or year by pressing
the W or X button.
Lighting submenu
Setting constant headlamp mode
If you have set constant headlamp mode
and the light switch is at $, the follow-
ing light up automatically when the engine
is running:
O the parking lamps and low-beam head-
lamps
O the tail lamps
O the license plate lamp
i USA only:
If you turn the light switch to T or L, the
corresponding light switches on. Constant head-
lamp mode remains activated if the light switch
is turned to Ã.
i Canada only:
If you turn the light switch to L, the low-
beam headlamps are switched on. Constant
headlamp mode remains activated if the light
switch is turned to T or Ã.
For safety reasons, it is only possible to
change this setting when the vehicle is sta-
tionary. The factory setting is
Constant
in
countries in which constant headlamp
mode is mandatory.
Use the buttons on the steering wheel.
E Press the V or U button repeat-
edly until you see the Settings menu in
the display.
E Press & to switch to the submenu
selection.
E Press the W or X to select the
Lighting submenu.
E Press the & or * button repeat-
edly until you see the
Hdlmp. mode
mes-
sage in the display.
To Next Page
Loading...
Need help?
General
