freightliner Sprinter Operator's Manual

Anti-theft systems
54
Safety and security
If the anti-theft alarm system is enabled
and the vehicle is locked, a visual and au-
dible alarm is triggered if one of the side
windows or the rear window on your vehi-
cle is smashed and someone reaches into
the interior, for example.
i If the interior motion sensor is primed and
the auxiliary heating (
e page 118) is switched
on, it is possible that the interior temperature
monitoring may cause a false alarm. In this case,
either deactivate the interior motion sensor or
switch off the auxiliary heating.
Enabling the interior motion sensor
E Close the side windows and the sliding
sunroof.
This will prevent false alarms.
E Lock your vehicle.
The interior motion sensor is enabled
after approximately 40 seconds.
i Do not leave anything (for example, mascots
or coat hangers) hanging on the rear-view mirror
or on the grab handles on the roof trim. This will
prevent false alarms.
Deactivating the interior motion sensor
Deactivate the interior motion sensor if
people or animals remain in the locked ve-
hicle. This will prevent false alarms.
E Turn the key to position 0 or 1 in the ig-
nition lock or remove the key.
E Press button 1.
Indicator lamp 2 lights up for approxi-
mately 5 seconds after the button is re-
leased.
E Lock the vehicle using the key.
The interior motion sensor remains de-
activated until you lock the vehicle
again.
Interior motion sensor

freightliner Sprinter Specifications

General

Brand	freightliner
Model	Sprinter
Category	Automobile
Language	English