freightliner Sprinter Operator's Manual

Seats
70
Controls in detail
Twin co-driver's seat
E To fold the seat cushion forward: lift
the seat cushion out of front
anchorage 1.
E Pull the seat cushion towards the front
slightly and out of rear anchorage 2.
E Fold the seat cushion up by the rear
edge.
i You can store various articles in the space
under the twin co-driver's seat.
E Positioning the seat cushion: fold
the seat cushion back.
E Slide the seat cushion under the back-
rest and into rear anchorage 2.
E Fold the seat cushion down.
E Press the front of the seat cushion
down until it engages in front
anchorage 1.
Adjusting the head restraint
1 Release button
2 Height adjustment
3 Angle adjustment (comfort head re-
straint only)
E To raise: pull the head restraint up to
the desired position.
E To lower: press release button 1 and
slide the head restraint down to the de-
sired position.
E To adjust the angle: hold the head re-
straint by the lower edge and fold it to
the desired position.
G Warning
You could knock yourself against the unpro-
tected pivoting frame if the seat is opposite
of the direction of travel and pushed right
back in a longitudinal direction.
Therefore, center the seat above the seat
base whenever you leave it. Alert passengers
to this danger.
Head restraints
G Warning
Only drive with the head restraints installed.
You could otherwise suffer serious or fatal in-
juries in the area of the upper spinal column.
Adjust the head restraint in such a way that
the upper edge of the head restraint is level
with your head.
Adjust your head restraint so that when your
head is relaxed, the back of your head is as
close as possible to the head restraint. This
will effectively support your head in an acci-
dent.
The head restraint must be engaged in a de-
tent.

freightliner Sprinter Specifications

General

Brand	freightliner
Model	Sprinter
Category	Automobile
Language	English