freightliner Sprinter Operator's Manual

Opening and closing
63
Controls in detail
Opening the rear doors to an angle of
270°
i If you prefer to keep door retainer 1 out of
the loading area when loading the vehicle, you
can swivel it 180° against the spring pressure
and onto the door, where it engages. The door
retainer then remains in this position and no
longer returns to its original position.
Before closing the door, release door retainer
1
from the detent and return it to its original posi-
tion.
E Open the rear door to an angle of ap-
proximately 45°.
E Pull door retainer 1 in the direction of
the arrow and hold it firmly.
E Open the rear door beyond 90° so that
the door retainer can no longer engage.
E Release the door retainer and open the
door to an angle of 270°.
E With the rear door opened to an angle
of 270°, push it against magnetic door
retainer 2 on the sidewall.
When the magnet on the rear door
is in contact with magnetic door
retainer 2, the rear door is held in
this position.
Closing the rear doors from outside
E Pull the door away from magnetic door
retainer 2 if necessary.
E Close the left-hand rear door firmly
from the outside.
E Close the right-hand rear door firmly
from the outside.
i Door retainer 2 is automatically released
from its detent.
Opening/closing the rear door from
the inside
The opening lever is on the inside of the
right-hand rear door. If a white marking is
visible, this indicates that the rear door is
unlocked.
G Warning
Make sure that the traffic area is clear when
opening the rear doors beyond 90°.
You could otherwise injure yourself and
others.
G Warning
Make sure that nobody can become trapped
as you close the rear door.

freightliner Sprinter Specifications

General

Brand	freightliner
Model	Sprinter
Category	Automobile
Language	English