freightliner Sprinter Operator's Manual

Operating system with steering wheel buttons
90
Controls in detail
The Settings menu has two functions:
O To reset: Press the 0 button for
3 sec.
function, with which you can re-
set all settings to the factory defaults
O a collection of submenus which you
can use to make individual settings for
your vehicle
Use the buttons on the steering wheel.
E Press the V or U button repeat-
edly until you see the Settings menu in
the display.
Settings menu
Resetting all settings
You can reset the functions in all sub-
menus to the factory defaults.
Use the buttons on the steering wheel.
E Press the V or U button repeat-
edly until you see the Settings menu in
the display.
E Press the 9 reset button for approxi-
mately 3 seconds.
You will see the message in the display
prompting you to press the 9 reset
button once more to confirm.
E Press the 9 reset button again.
The functions in most submenus are re-
set to the factory defaults.
i If you do not press the 9 reset button a
second time to confirm, the changed settings re-
main set. The Settings menu is displayed again
after approximately 5 seconds.
For safety reasons, it is not possible to reset all
of the functions while the vehicle is in motion.
For example, the Hdlmp. mode function in the
Lighting submenu remains unchanged.
Resetting the functions of a submenu
You can reset the functions of an individual
submenu to the factory defaults.
Use the buttons on the steering wheel.
E Press the V or U button repeat-
edly until you see the Settings menu in
the display.
E Press & to switch to the submenu
selection.
E Press W or X to select a sub-
menu.
E Press the 9 reset button for approxi-
mately 3 seconds.
You will see the message in the display
prompting you to press the 9 reset
button once more to confirm.
E Press the 9 reset button again.
Most functions in the submenu are re-
set to the factory defaults.
i If you do not press the 9 reset button a
second time to confirm, the changed settings re-
main set. The Settings menu is displayed again
after approximately 5 seconds.
For safety reasons, it is not possible to reset all
of the functions while the vehicle is in motion.
For example, the Hdlmp. mode function in the
Lighting submenu remains unchanged.
Settings menu

freightliner Sprinter Specifications

General

Brand	freightliner
Model	Sprinter
Category	Automobile
Language	English