Replacing remote control batteries
244
Practical hints
If the remote control batteries (remote
keyless entry) are discharged, you will only
be able to lock and unlock the vehicle man-
ually using the key.
Always replace all the batteries at the
same time. It is advisable to have the bat-
teries changed at an authorized Sprinter
Dealer.
You need two CR 2025 3 V cell batteries or
equivalent.
! Do not operate the remote control while the
batteries are being replaced.
E Release the mechanical key by press-
ing the release button 2.
The key folds out.
E Remove battery cover 1 in the direc-
tion of the arrow.
E Remove old batteries from the battery
tray.
i Do not touch the battery contact surfaces.
When inserting the batteries, make sure that
they are clean and lint-free.
E Insert new batteries with the positive
pole facing up. Use a lint-free cloth to
do so.
E Press battery cover 1 until it snaps
into place.
E Check the function of all remote con-
trol buttons on the vehicle.
Bulbs and lights are an important aspect of
vehicle safety. For this reason, make sure
that all bulbs are in working order at all
times.
Replacing remote control batteries
G Warning
Batteries contain toxic and corrosive sub-
stances. Keep batteries away from children.
Consult a doctor immediately if a battery is
swallowed.
H Environmental note
Batteries contain materials that can harm the
environment if disposed of improperly. Recy-
cling of batteries is the preferred method of
disposal. Many states require sellers of bat-
teries to accept old batteries for recycling.
Replacing bulbs
G Warning
Bulbs and bulb holders can become very hot.
For this reason, allow the light to cool down
before changing a bulb. Otherwise, you could
burn yourself when you touch it.
Keep bulbs out of the reach of children. Oth-
erwise, they could, for example, damage the
bulbs and injure themselves.
Never use a bulb which has been dropped.
Such a bulb may explode and injure you.
To Next Page
Loading...
Need help?
General
