Service products and lubricants
281
Technical data
Valid MB oil specification sheets for your
vehicle:
O 228.51
O 229.31
O 229.51
They are of a high quality standard and
have a beneficial effect on:
O engine wear
O fuel consumption
O emissions
Multi-grade engine oils of the prescribed
SAE class (viscosity) may be used all year
round. Make sure that you always take the
outside temperatures into account.
i The oil change intervals may be shortened
depending on the sulfur content of the fuel. Ob-
serve the details in your Maintenance Booklet.
Select the SAE class (viscosity) of the en-
gine oil in accordance with the outside
temperature.
! If the SAE viscosity class of the engine oil
used does not cover the outside temperature
range in which you are operating the vehicle, it
must be changed in good time, in particular be-
fore the cold season commences. Using an en-
gine oil that does not have adequate
temperature characteristics can lead to engine
damage.
The temperature range information of the SAE
classification always refers to that of fresh oil.
The temperature characteristics of the engine oil
may deteriorate significantly due to aging in op-
eration especially at low outside temperatures.
For this reason, we recommend that the engine
oil be changed before the cold season com-
mences. Use an approved engine oil of the spec-
ified SAE class.
i The maximum oil change interval can only
be achieved using oils of a particularly high qual-
ity grade.
The following oils have been determined to
meet our requirements:
MB approved
engine oil
SAE MB
sheet
Addinol Extra Power
MV 0538 LE
5W-30 229.31
Addinol Extra Truck
MD 1049LE
10W-40 228.51
Chevron Supreme
Synthetic Motor Oil
SAE 5W-40
5W-40 229.31
Fuchs Titan Cargo
Maxx SAE 10W-40
10W-40 228.51
Fuchs Titan GT1 SAE
5W-30
5W-30 229.51
Havoline Ultra S
5W-30
5W-30 229.31
Havoline Ultra S
5W-40
5W-40 229.31
Mobil 1 ESP Formula
MB
5W-40 229.51
Motul 8100 X-clean
5W-40
5W-40 229.31
Motul Specific MB
229.31 5W-40
5W-40 229.31
Motul Specific MB
229.51 5W-30
5W-30 229.51
ee