Identification labels
295
Technical data
The tire and loading information label
1
or
the tire inflation pressure label is located
on the driver's door B-pillar. Each label
shows the required tire pressure values for
the specified genuine tire set.
The tire and loading information label also
gives the number of seats and permissible
load.
1 Tire and loading information label or
tire inflation pressure label
Tire and loading information label
Tire inflation pressure label
2 Number of seats
3 Permissible load
4 Recommended tire inflation pressure
for cold tires
i The data shown on the labels is for illustra-
tive purposes only. The load limit data and seat-
ing data is specific to each vehicle and may vary
from the data shown in the illustration.
Refer to the label on your vehicle for data specif-
ic to your vehicle.
The tire inflation pressure specifications
are for all loads up to the maximum total
permissible weight and only for genuine
tires when they are cold.
For tire and loading information, see
"Loading the vehicle" (
e page 170).
Tire labels
1. Vehicles with a permissible total weight smaller than 10000 lbs (4536 kg) only.