6-44
6.3.2 Model and specifications
6.3.2.1 Model
• There are two models for the synchronous motor drive PG interface card, reflecting differences in the external
equipment output interface:
OPC-VG1-PMPG: Line driver signals
OPC-VG1-PMPGo: Open collector/voltage output
Exercise care that you do not specify the wrong model when purchasing one of the cards
.
The model for the FRENIC-VG's PG option reflects differences in the external equipment output
interface (line driver output versus open collector output/voltage output). Since the interface type cannot
be selected with switches, it is necessary to determine which interface you require
before purchase
(OPC-VG1-PMPG or OPC-VG1-PMPGo).
Model format:
OPC-VG1-PMPG
None: Line driver model
o: Open collector model
Option name: PMPG Permanent magnet synchronous motor
drive with PG synchronized drive option
VG1 → FRENIC-VG inverter
Accessories
Plug (Model: 20-pin 10120-3000PE by Sumitomo 3M Limited)
Housing (cover) (Model: 20-pin 10320-52A0-008 by Sumitomo 3M Limited)
Spacers: 3
Screws (M3): 3
To Next Page
Loading...
