Fuji Electric FRENIC-VG Series - Model and Specifications; Model

6.11 DI Interface Card
6-217
Chap. 6
CONTROL OPTIONS
6.11.2 Model and specifications
6.11.2.1 Model
Model format: OPC-VG1-DI
Accessories
Flag (type: 20-pin 10120-3000PE by Sumitomo 3M Limited)
Housing (cover) (type: 20-pin 10320-52A0-008 by Sumitomo 3M Limited)
Spacers: 3
Screws (M3): 3
Power supply harness (for 24 V power supply): 1
[Installation constraints]
(1) Supported option combinations
• Two DI interface cards may be installed at the same time as long as they are set as DIA and DIB.
Figure 6.11.1
(2) Unsupported combinations (will result in an operation procedure error)
When two cards are being used at the same time, both cannot be set to either DIA or DIB.
Attempting to use the inverter in this configuration will result in operation procedure error
er6 .
FRENIC-VG FRENIC-VG
OPC-VG1-DI
(DIA)
OPC-VG1-DI
(DIA)
OPC-VG1-DI
(DIB)
OPC-VG1-DI
(DIB)
Figure 6.11.2
Host inverter name: VG1 → FRENIC-VG
Option name: DI → Digital input option
FRENIC-VGFRENIC-VG FRENIC-VG
OPC-VG1-DI
(DIA)
OPC-VG1-DI
(DIB)
OPC-VG1-DI
(DIB)
OPC-VG1-DI
(DIA)
Reserved Reserved