6.8 17-bit High Resolution ABS Interface Card
6-199
Chap. 6
CONTROL OPTIONS
6.8.8 Related option
Distribution cable (Product to be arranged independently)
Length and model
L [mm] Model
Terminal treatment on the
PG side
Remarks
5,000
+500
WSC-P06P05-W
Unfastened leads
(Illustration A)
WSC-P06P05-E Connector (Illustration B)
10,000
+1,000
WSC-P06P10-W
Unfastened leads
(Illustration A)
WSC-P06P10-E Connector (Illustration B)
15,000
+1,500
WSC-P06P15-W
Unfastened leads
(Illustration A)
- -
20,000
+2,000
WSC-P06P20-W
Unfastened leads
(Illustration A)
WSC-P06P20-E Connector (Illustration B)
50,000
+2,000
WSC-P06P50 Connector (Illustration B) Handled as a special-purpose item.
When an applicable serial PG is incorporated into our motor, PG wire can support either unfastened leads
(terminal block) or connector.
(Illustration A)
Inverter side
Encoder side
Connector model
Connector on the inverter side
Plug housing main unit 54180-0619
Plug shell cover 58299-0626
Plug shell body 58300-0626
Plug mold cover (A) 54181-0615
Plug mold cover (B) 54182-0605
Cable clamp 58303-0000
Clamp screw 59832-0009
Manufactured by Molex
Figure 6.8.8 Cable for Encoder Connection
To Next Page
Loading...
