Fuji Electric FRENIC-VG Series - Common Specifications; Specifications Table

6.1 Common Specifications
6-1
Chap. 6
CONTROL OPTIONS
6.1 Common Specifications
6.1.1 Specifications table
Table 6.1.1
Category Name Model
Switch-accessible
functions
Specifications
See
Section
F/V converter OPC-VG1-FV (*1) F/V converter 6.9
Synchro interface OPC-VG1-SN Dancer control synchro interface circuit 6.10
Analog cards
Aio expansion card OPC-VG1-AIO 2 [Ai] + 2 [Ao] expansion card 6.13
OPC-VG1-DIA
Di interface card OPC-VG1-DI
OPC-VG1-DIB
16-bit Di binary or BCD 4-digit + sign
speed command, torque command, and
torque current command configuration
(Configuration switching is required at
the mounting port.)
6.11
OPC-VG1-DIOA
Function selection Di × 4-bit +
function selection Do × 8-bit expansion
Dio expansion card OPC-VG1-DIO
OPC-VG1-DIOB
UPAC I/O expansion
Di × 16-bit + Do × 10-bit
6.12
T-link interface card OPC-VG1-TL T-link interface card 6.4
CC-Link interface card OPC-VG1-CCL CC-Link-compliant card 6.7
OPC-VG1-PG(SD)
OPC-VG1-PG(LD)
OPC-VG1-PG(PR)
OPC-VG1-PG
OPC-VG1-PG(PD)
+5 V line driver type encoder interface
(A, B, Z signals) (500 kHz)
Motor speed, line speed, position
command, position detection
OPC-VG1-PGo(SD)
OPC-VG1-PGo(LD)
OPC-VG1-PGo(PR)
OPC-VG1-PGo
OPC-VG1-PGo(PD)
Open collector type encoder interface
(A, B, Z signals) (100 kHz)
Motor speed, line speed, position
command, position detection
6.2
PG interface card
OPC-VG1-SPGT
17-bit high-resolution ABS encoder
interface
6.8
OPC-VG1-PMPG +5 V line driver output
Synchronous motor drive
PMPG interface card
OPC-VG1-PMPGo Open collector output
A, B,
magnetic pole
positions
(max. 4-bit)
6.3
Digital 8-bit
(A and B ports
only)
UPAC communication
high-speed serial card OPC-VG1-SIU
(*1)
Used for driving two or more inverters
with a single inverter equipped with a
UPAC via the communications link
Separately
issued
manual
PROFIBUS-DP interface
card
OPC-VG1-PDP
(*2) PROFIBUS-DP interface card -
Field bus interface
card
(C port only)
DeviceNet interface card OPC-VG1-DEV
(*1) DeviceNet interface card -
SX bus interface card OPC-VG1-SX SX bus interface card 6.5
E-SX bus interface card OPC-VG1-ESX E-SX bus interface card 6.15
Digital 16-bit
(D port only)
User Programmable
Application Card (UPAC)
OPC-VG1-UPAC
(*2)
Used for making customizable software
at the user site for inverter control
Separately
issued
manual
Safety card
(E port only)
Functional safety card OPC-VG1-SAFE
(*2) Safety standard-compliant card
Separately
issued
manual
Control circuit
terminal
(F port only)
High-speed serial
communications-compatible
terminal block
OPC-VG1-TBSI
(*2)
Used for multiplex systems such as
multi-winding motor drive system and
direct parallel system
6.6
F/V converter MCA-VG1-FV F/V converter 6.9
Synchro interface MCA-VG1-SN Dancer control synchro interface circuit 6.10
Standalone options
(*1)
PG signal switch MCA-VG1-CPG
PG/NTC signal switch (2-signal
switch)
6.14
WPS-VG1-STR Windows CD-ROM (free version)
Separately
issued
manual
Loaders Inverter support loader
WPS-VG1-PCL Windows CD-ROM (paid-for version)
Separately
issued
manual
(*1) Available soon
(*2) Available in the ROM version H1/2 0020 or later and product serial number version BC or later.