6-2
For options whose manuals are separately issued as shown in the above table, refer to the documents
listed below.
Model Name Material No. Remarks
OPC-VG1-SIU UPAC communication high-speed serial card
OPC-VG1-UPAC User Programmable Application Card (UPAC)
24A7--0044*
OPC-VG1-SAFE Functional safety card INR-SI47-1541*-
WPS-VG1-STR FRENIC-VG Loader (free version) INR-SI47-1588*-
WPS-VG1-PCL FRENIC-VG Loader (paid-for version) INR-SI47-1616*-
Note 1: A box () replaces an alphabetic letter: J (Japanese), E (English), or C (Chinese).
An asterisk (*) replaces an edition number (a, b, c, …).
Note 2: The materials are subject to change without notice. Be sure to obtain the latest editions for use.
Mounting ports for control options
Figure 6.1.1 Control Option Mounting Ports on the Control Printed Circuit Board
Note: To use the control circuit terminal option (F port), replace the standard control circuit terminal
printed circuit board.
F port (CN1)
C port (CN6)
B port (CN2)
port (CN3)
E port (CN16)
D port (CN10)
To Next Page
Loading...
