Fuji Electric FRENIC-VG Series - Dimensions; Installation Method

6.14 Optional PG Changeover Card
6-245
Chap. 6
CONTROL OPTIONS
6.14.3 Dimensions
Figure 6.14.1 Product Dimensions
TT1 TC1 PA1 PP1 PA PGP TT2 TC2 PA2 PP2
PB1 PM1 THT THC PB PGM P24 SEL PB2 PM2
Screw size: M3
Figure 6.14.2 Terminal Arrangement
6.14.4 Installation method
Mount the PG changeover card (unit) with an M5 bolt each on the upper and lower sides of the unit to a
sturdy structure so that the characters on the label of the unit will be visible on the front side.
• Install the card on metallic or other nonflammable structure.
Otherwise, a fire may result.
• Make sure that no foreign substances, such as lint, paper, wood chips, dust, or scrap metal will penetrate into
the unit.
Otherwise, a fire may result.
質量:1.5kg
Mass: 1.5 kg