6-188
6.8 17-bit High Resolution ABS Interface Card
OPC-VG1-SPGT
6.8.1 Product overview
This option allows the FRENIC-VG to interface with the 17-bit, high-resolution
ABS encoder manufactured by Tamagawa Seiki Co., Ltd.
(1) 17-bit, high-resolution ABS interface card
Available for induction motor/synchronous motor control PG serial interface
(speed/position feedback)
Available for machine axis serial PG interface (position feedback) (available in the
near future)
For the connectable PG format, refer to Table 6.8.1.
(2) Pulse frequency dividing output
Feedback signals from serial encoder are frequency-divided to output pulse signals.
・ This option and some of other options cannot be mounted at the same time. If this option is combined with an
option that cannot be mounted at the same time, operation procedure error
er6
is output.
6.8.2 Model and specifications
6.8.2.1 Model
Model content: OPC-VG1
-SPGT
Mounted inverter name VG1 -> FRENIC-VG
Option name: SPGT -> 17-bit, high-resolution serial
encoder interface option
Accessories
Three spacers
Terminating resistance (220 , 1/4 W)
・Do not use the product that is damaged or lacking parts.
Doing so could cause injury or damage.
To Next Page
Loading...
