6.8 17-bit High Resolution ABS Interface Card
6-193
Chap. 6
CONTROL OPTIONS
6.8.4.2 Basic connection diagram
When motor-integrated or directly-connected high resolution serial encoder is used to perform control
Figure 6.8.4
When high resolution serial encoder mounted in the machine axis is used to perform control (available
soon)
OPC-VG1-SPGT
Figure 6.8.5
Note 1: If the cable is longer than 50 m, install the supplied terminating resistance (220 , 1/4 W) between the encoder terminal SD
____
and the SD terminal.
To Next Page
Loading...
