6.12 DIO Expansion Card
6-235
Chap. 6
CONTROL OPTIONS
6.12.5.2 DIOB selected
Only the use of the OPC-VG1-UPAC as another option (available soon) will make it possible to operate
the following functions.
DIOB functions are allocated to control variables (to be specific, global variables allocated to the control
variables) that will be available at the time of selecting a six-unit FRENIC-VG system.
To use DIOB functions, select the corresponding control variables from the list of control variables or
specify the address (%IQ area) of each DIOB function and register the control variable, and check the box
in the system definition.
The optional OPC-VG1-SIU module is required to operate DIOB options INV2 through INV6.
Table 6.12.7
Address No
Area
Name Data category
Type
Direction
%IW1.13 14 INV1 DI control of INV1 (DIOB option; 16 bits) Data category; 26 W
%IW2.13 14 INV2 DI control of INV2 (DIOB option; 16 bits) Data category; 26 W
%IW3.13 14 INV3 DI control of INV3 (DIOB option; 16 bits) Data category; 26 W
%IW4.13 14 INV4 DI control of INV4 (DIOB option; 16 bits) Data category; 26 W
%IW5.13 14 INV5 DI control of INV5 (DIOB option; 16 bits) Data category; 26 W
%IW6.13 14 INV6 DI control of INV6 (DIOB option; 16 bits) Data category; 26 W
The UPAC is in DI
control of INV1
through INV6. Used
by INV1 through
INV6.
INV12,3,4,5,6UPAC
%QW1.41 24 INV1 DO control of INV1 (DIOB option; 10 bits) Data category; 27 W
%QW2.41 24 INV2 DO control of INV2 (DIOB option; 10 bits) Data category; 27 W
%QW3.41 24 INV3 DO control of INV3 (DIOB option; 10 bits) Data category; 27 W
%QW4.41 24 INV4 DO control of INV4 (DIOB option; 10 bits) Data category; 27 W
%QW5.41 24 INV5 DO control of INV5 (DIOB option; 10 bits) Data category; 27 W
%QW6.41 24 INV6 DO control of INV6 (DIOB option; 10 bits) Data category; 27 W
The UPAC is in DO
control of INV1
through INV6. Used
by INV1 through
INV6.
UPACINV1,2,3,4,5,6
To Next Page
Loading...
