6-200
Green
Pin No. 1 2 3 4 5 6 Case
Green
① Red Black Orange Orange/white Sky blue
Sky
blue/white
Protection tube
② White Black Yellow Brown Red Blue
Signal name P5 M5 BAT+ BAT－ SIG+
※
1
SIG－
※
2
For green, either 1) or 2) is applicable.
※1： Connect the negative logic side of the communications signal.
※2： Connect the positive logic side of the communications signal.
(Illustration B)
Connector model
Connector on the
inverter side
Connector on the motor
side
Plug housing main unit 54180-0619
Cap housing 1-172332-9
Plug shell cover 58299-0626
Socket 170361-1
Plug shell body 58300-0626
Cover (X2) 316455-1
Plug mold cover (A) 54181-0615
Screw (X2) XPB M2.6×10
Plug mold cover (B) 54182-0605
Nut (X2) M2.6
Cable clamp 58303-0000
Manufactured by Tyco Electronics
Clamp screw 59832-0009
Manufactured by Molex
Green
Option card side 1 2 3 4 5 6 Shell
Motor side 7 8 1 2 5 4 3
Green ① Red Black Orange
Orange/
white
Blue/white Blue Shield
② White Black Yellow Brown Blue Red Shield
Signal name P5 M5 BAT+ BAT- SIG+
*
1
SIG－
*
2
FG
*1: Connect the negative logic side of the communications signal.
*2: Connect the positive logic side of the communications signal.
* When you prepare cables, the following electric wires are recommended.
Recommended electric wires
When the cable length is 10 m or less: RMCV-SB-A-AWG#25/2P+AWG#23/2C or AWG#23/3P
When the cable length is more than 10 m and less than or equal to 50 m: RMCV-SB-A AWG#25/2P+AWG#17/2C or the
equivalent
To Next Page
Loading...
