6.4 T-Link Interface Card
6-61
Chap. 6
CONTROL OPTIONS
Function code name
No.
Name Touch panel display
Available
scope
Description
H107
Light alarm target
definition 2
L-ALM 2
0000 to
1111
Select the alarm operation upon occurrence of an
inter-inverter link communication error (
er4
)
and toggle error (
arf
).
er4
and
arf
represent the number of hundreds
and the number of units, respectively.
0 in the corresponding decimal place: Alarm
occurrence, 1: Light alarm (
l-al
)
E10
|
E13
Select X11 - X14
function.
X11 to X14
FUNC
*1
Select the command when each of the X11 to
X14 bits is 1.
To perform toggle monitoring with the X
terminal bits, set TGL1 and TGL2 for two of the
terminals.
*1 For the details, refer to Chapter 4, Section 4.3 "Details of Function Codes."
To Next Page
Loading...
