6-258
3) Function code o30 = 2, o31 = 5.0
(
er4
alarm occurs if communication does not recover within 5 seconds after communication error
(light alarm) occurs)
Figure 6.15.9
4) Function code o30 = 2, o31 = 5.0 (communication recovers within 5 seconds after communication
error (light alarm) occurs)
Figure 6.15.10
5) Function code o30 = 3 (operation continues)
Figure 6.15.11
*1 During this period, if communication does not recover and a new command and setting are not sent, the
command (run command, speed command, or both) from communication before the communication error
occurred is held.
To Next Page
Loading...
