128 Upgrade and Maintenance Manual TX100 S3 Core Edition
Main memory
10.4.4 Installing a memory module
Ê Replace the defective memory module as described in section "Installing
memory modules" on page 122.
10.4.5 Concluding steps
Perform the following procedures to complete the task:
Ê Close the side cover as described in section "Installing the side cover" on
page 56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section "Connecting the server to the mains" on
page 57.
Ê If available, update the system board BIOS to the latest version as described
in section "Updating the system board BIOS via USB stick" on page 67.
To Next Page
Loading...
Need help?
General