TX100 S3 Core Edition Upgrade and Maintenance Manual 183
Front panel and external connectors
13.1.8 Concluding steps
Perform the following procedures to complete the task:
Ê Insert the HDD cage as described in "Installing the HDD cage" on page 62.
Ê Install the front cover as described in section "Installing the front cover" on
page 51.
Ê Install accessible drives as described in section "Installing accessible drives"
on page 149.
Ê Close the side cover as described in section "Installing the side cover" on
page 56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section "Connecting the server to the mains" on
page 57.
To Next Page
Loading...
Need help?
General