40 Upgrade and Maintenance Manual TX100 S3 Core Edition
Basic hardware procedures
4.2 Shutting down the server
V CAUTION!
For further safety information, please refer to chapter "Important
information" on page 27.
Ê Inform the system administrator that the server will be shut down and put
offline.
Ê Terminate all applications.
Ê Verify if your backup software solution requires preparative configuration
before starting the procedure as described in section "Verifying and
configuring the backup software solution" on page 66.
Figure 2: Power button on the front panel
Ê Shut down the server.
I If the system is running an ACPI-compliant operating system,
pressing of the On / Off button will perform a graceful shutdown.
/
To Next Page
Loading...
