Fujitsu PRIMERGY TX100 S3 Core Edition - Concluding Steps

116 Upgrade and Maintenance Manual TX100 S3 Core Edition
System fan modules
Figure 64: Installing the system fan module 2
Ê Fasten the screws (see circles).
8.2.5 Concluding steps
Perform the following procedures to complete the task:
Ê Install the HDD cage as described in section "Installing the HDD cage" on
page 62.
Ê Close the side cover as described in section "Installing the side cover" on
page 56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section "Connecting the server to the mains" on
page 57.