Fujitsu PRIMERGY TX100 S3 Core Edition - Installing an Accessible Drive Dummy Cover; Installing the Filler Cover into Drive Bay 2

168 Upgrade and Maintenance Manual TX100 S3 Core Edition
Accessible drives
12.3.5 Installing an accessible drive dummy cover
V CAUTION!
Always replace the dummy cover into the unused drive bays to comply
with applicable EMC regulations and satisfy cooling requirements.
12.3.5.1 Installing the filler cover into drive bay 2
Figure 104: Installing the filler cover into drive bay 2
Ê Hold the backup drive filler cover by its two handle recesses and fit it into
drive bay 2.