Fujitsu PRIMERGY TX100 S3 Core Edition - Remote Desktop Connection Methods; Connect by Computer Name; Connect by IP Address

50 Upgrade and Maintenance Manual TX100 S3 Core Edition
Basic hardware procedures
4.4 Closing the server
V CAUTION!
● Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.
● In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX100 S3 Core Edition server must not run while the
side cover is removed.
● For further safety information, please refer to chapter "Important
information" on page 27.