64 Upgrade and Maintenance Manual TX100 S3 Core Edition
Basic hardware procedures
Figure 25: Securing the HDD cage
Ê Secure the HDD cage to the chassis with four screws (see circles).
4.8.1 Concluding steps
Perform the following procedures to complete the task:
Ê Reinstall the HDDs as described in section "Installing 3.5-inch HDDs" on
page 85.
Ê Close the side cover as described in section "Installing the side cover" on
page 56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section "Connecting the server to the mains" on
page 57.
To Next Page
Loading...
