Fujitsu PRIMERGY TX100 S3 Core Edition - Concluding Steps

96 Upgrade and Maintenance Manual TX100 S3 Core Edition
Hard disk drives
Figure 48: Inserting the Easyclick rails in the bay
Ê Slide the Easyclick rails completely into their bays (1).
Ê Press out on the green Easyclick rail handles to lock the rails in place (2)
7.3.4 Concluding steps
Perform the following procedures to complete the task:
Ê Close the side cover as described in section "Installing the side cover" on
page 56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section "Connecting the server to the mains" on
page 57.
/
0