Fujitsu PRIMERGY TX100 S3 Core Edition - Installing an Optical Disk Drive (ODD); Preparing the Optical Disk Drive

152 Upgrade and Maintenance Manual TX100 S3 Core Edition
Accessible drives
12.2.4 Installing an optical disk drive (ODD)
12.2.4.1 Preparing the optical disk drive
I There are two fixation plates for accessible drives. You need one fixation
plate for an accessible drive to be installed.
Figure 87: Removing the fixation plate from the chassis
Ê Pull out on the green handle (1).
Ê Lift up the fixation plate and remove it (2).
/
0