196 Upgrade and Maintenance Manual TX100 S3 Core Edition
System board and components
14.1.4 Concluding steps
Perform the following procedures to complete the task:
Ê Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
Ê Install the HDD cage as described in section "Installing the HDD cage" on
page 62.
Ê Close the side cover as described in section "Installing the side cover" on
page 56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section "Connecting the server to the mains" on
page 57.
To Next Page
Loading...
