Fujitsu PRIMERGY TX100 S3 Core Edition - Page 6

Upgrade and Maintenance Manual TX100 S3 Core Edition
Contents
4.3.3 Removing the front cover . . . . . . . . . . . . . . . . . . . . . 49
4.4 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 50
4.4.1 Installing the front cover . . . . . . . . . . . . . . . . . . . . . 51
4.4.2 Installing the optical disk drive (ODD) . . . . . . . . . . . . . . 52
4.4.3 Installing the backup drive . . . . . . . . . . . . . . . . . . . . 54
4.4.4 Installing the side cover . . . . . . . . . . . . . . . . . . . . . . 56
4.5 Connecting the server to the mains . . . . . . . . . . . . . . 57
4.6 Switching on the server . . . . . . . . . . . . . . . . . . . . . 58
4.7 Removing the HDD cage . . . . . . . . . . . . . . . . . . . . 60
4.7.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . . 60
4.8 Installing the HDD cage . . . . . . . . . . . . . . . . . . . . . 62
4.8.1 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . . 64
5 Basic software procedures . . . . . . . . . . . . . . . . . . . 65
5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 65
5.1.1 Removing backup and optical disk media . . . . . . . . . . . . 65
5.1.2 Verifying and configuring the backup software solution . . . . . . 66
5.2 Completing the maintenance task . . . . . . . . . . . . . . . 67
5.2.1 Updating the system board BIOS via USB stick . . . . . . . . . 67
5.2.2 Note on boot sequence settings . . . . . . . . . . . . . . . . . 68
5.2.3 Verifying and configuring the backup software solution . . . . . . 69
5.2.4 Viewing the System Event Log (SEL) . . . . . . . . . . . . . . . 70
5.2.5 Performing a RAID array rebuild . . . . . . . . . . . . . . . . . 71
6 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.1 Replacing the power supply unit . . . . . . . . . . . . . . . . 74
6.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 74
6.1.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . . 74
6.1.3 Disconnecting power cables . . . . . . . . . . . . . . . . . . . 75
6.1.4 Removing the power supply unit . . . . . . . . . . . . . . . . . 77
6.1.5 Installing the power supply unit . . . . . . . . . . . . . . . . . . 79
6.1.6 Reconnecting power cables . . . . . . . . . . . . . . . . . . . 81
6.1.7 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . . 82