Revision 1 10 9/10/2019
Important Safety Guidelines for the Model 903W Phosgene
Analyzer
Please read the following warnings and cautions carefully before using the 903W Phosgene
Analyzer
This equipment must be used as specified by the manufacturer or overall safety
will be impaired.
Access to this equipment should be limited to authorized, trained personnel ONLY.
Observe all warning labels on the analyzer enclosures.
The analog outputs and alarm relay contacts may be powered by a source separate from the
one (s) used to power the analyzer system. Disconnecting the main power source may not
remove power from the analog output signals.
Any safety recommendations or comments contained herein are suggested guidelines only.
Galvanic Applied Sciences Inc. bears no responsibility and assumes no liability for the use and/or
implementation of these suggested procedures.
This system, when operating in its normal mode, and/or when it is being serviced, maintained,
installed and commissioned contains items which may be hazardous to humans if handled or
operated incorrectly or negligently. These items include, but are not limited to:
• High Voltage Electrical Energy
• Toxic and Explosive Gases
The 903W Phosgene Analyzer is designed to be safely operated in a Class 1, Div.2, Group B, C
and D,T3 area.
To Next Page
Loading...
